Australia
's Finest Valve Experts ! Check Non-Return Valves


 

Check Valves

JV Check / Non-Return Valves

JV Check / Non-Return Valves are designed and manufactured according to BS1868. Check valves in piping systems in all fields are considered very critical in their application. The function of check valves is to prevent the reverse flow of fluids e.g. in case of failure or sudden shutdown of the piping system. The Sealing efficiency, therefore, is a very critical aspect of check valves.


JV Check Valves
JV Check Valves are available in wide variety of materials such as Cast Iron, Cast Carbon Steel, Cast Stainless Steel of all Grades, High Alloy Steels like Alloy-20, CD4MCu and Hastelloy. Manufacturing ranges 50NB to 600NB and Pressure Rating from ANSI 125# to 1500#.
d

Dual Flap Check Valves

These check valves are of wafer design and fit between flanges.
The valve discs are in two halves and held in the closed position by a stainless steel spring.

The reaction of the stainless steel spring quickly and quietly shuts the valve off before the flow in the line can reverse. Water hammer is virtually eliminated.

These valves can be installed in any position.
d

Lift or Piston Check Valves

This type of check valve uses a piston rather than a hinge mounted disc to prevent the reversal of flow. This provides a cushioning effect during operation. These valves can only be used in a horizontal position.

Lift check valves and globe valves are flow restricting and therefore often used in conjunction.
d

Air Check Valves

These check valves are specifically designed for compressed air services.
The disc is manufactured from flat stainless steel and held against the seat by a spring whilst the compressor is idling or in-operative. It is recommended that the valve be located at least 3 metres from the compressor.
Non Return / Check Valve - Technical Specification
Size
50 NB through 600 NB
Pressure Rating
ANSI - 125#,150#, 300#, 400#, 600#, 900#, 1500#, 2500#
Type
Swing/ Lift , Dual Check, Wafer Check, Piston , Air Check Valve, Disc Check
End Connection
Flanged, Butt / Socket Weld , Screwed BSP, NPT, Wafer
Operation
Automatic with return pressure
Port Opening
Full
Seat
Integral/ Renewable/ Weld deposited
Disc
Solid
Gasket & Packing
PTFE/ Graphite/ Asbestos/ Spiral wound/ Ring joint
 
Home | About Us |Products | Brands | Services | References | Contact Us | Disclaimer | Privacy Policy |Sitemap |
Just Valves Pty Ltd ©2008 | ABN: 76 127 458 968