The full range of industrial valves, actuation, piping, sealing, instrumentation and flow control products we supply and support across Australia.
This range is not available online just yet. This range is part of what we supply, it’s simply not listed for online purchase.
Contact our team and we’ll take you through the full range, specs and pricing.
Sluice valves operate on the same rising gate principle as gate valves, but are specifically designed and tested to Australian water utility standards (AS 2638).
Penstocks use a similar gate mechanism but are typically installed in open channel or concrete wall applications where a flat plate slides in guides to control water flow, rather than in a pressurised pipeline. Extended spindle options allow operation from the surface for buried installations up to 6m deep.
| Parameter | Details |
|---|---|
| Standard | AS 2638.1 (screwed gland), AS 2638.2 (flanged) |
| Sizes | DN50 to DN600 |
| Body materials | Cast iron (standard), ductile iron (GJS 500), stainless steel 316 |
| Connection | Flanged — AS 4087, AS/NZS 4441 |
| Pressure rating | PN10 to PN16 |
| Wedge | Solid wedge, flexible wedge, rubber-encapsulated wedge |
| Stem | Rising (above-ground/chamber), non-rising (buried service) |
| Extended spindle | Available to 6m depth |
| Coating | Fusion-bonded epoxy (buried), bitumen, epoxy paint (above ground) |
| Operating options | Handwheel, surface box and key, gearbox (DN300+), electric actuator |
| Standards | AS 2638.1, AS 2638.2, AS 4087, AS/NZS 4441, WSA 101 |
